• Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.


• Drive Tires: 23 x 9.50-12, 4 ply


• Steering Control: Hydraulically dampened twin levers, adjust fore and aft


• Front Caster Tires: 13 x 5.0-6, smooth-tread, semi-pneumatic.


• Parking Brake: Lever-actuated disc brake.

• Electrical: 12-volt battery with 15-amp alternator

Deck

• Width Cutting Deck: 60″


• Deck Style: Floating Deck


• Blade Tip Speed: Approximately 18,500 fpm.


• Cutting Heights: 1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.


• Blades: 3 Blades at 16.25″ Length

Power Components

• Engine Type: Carbureted


• Engine Speed: 3,750 rpm


• Air Filter: Heavy-duty canister air filtration system


• Fuel Type: Gas Carbureted


• Fuel Indicator: Yes – electronic Sender


• Drive: Hydro-Drive


• Drive Description: unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors


• Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.


• Carb Compliant: Yes


• Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.


• Drive Wheel Release: Allows unit movement without engine running.


• Casters: .50″ thick caster yoke arms.