Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

Task 1: Fabricate 02 scuttles (RQAWTS 1-93-1 and 1-93-2) that meet the specifications outlined below:

• 12” (opening) Diameter Raised Quick-Acting Watertight Scuttle, w/ Coaming 12” (diameter) x 3/16” (thickness), Steel, 15 psi (incl. Frame/Coaming and Fittings)


• Original reference: NAVSEA Drawing 803-1623053, Rev -, Scuttle, WT, Raised, Quick Acting, 12 Dia 15 psi-Arrangement
  
  
  
  • Note: This drawing has been identified as obsolete. If drawing is unattainable, utilize the following reference.
  
  
  
  


• Substitute reference: NAVSEA Dwg 803-1401890, Rev G, Scuttle, WT, Raised, Quick Acting, 18 Dia 35 psi-Arrangement (ASSY B)
  
  
  
  • Note: This reference details fabrication of an 18” diameter scuttle. SOW is to provide 12” scuttles. Intention is for vendor to utilize the same hardware and general design of the 18” diameter scuttle to manufacture a 12” diameter scuttle.
  
  
  
  


• If necessary, parts may be reused from existing scuttles if they are in working condition (I.e. handles and locking mechanisms). Coordinate shipchecks with the POC identified below to id parts that may be reused or to obtain any other necessary information.


• Shipcheck POC: LTJG Liam Middleton, liam.f.middleton@uscg.mil, (843) 740-7096
  
  
  
  • CGC HAMILTON is available for shipchecks until 29 MAR 2023 at FLETC in North Charleston, SC. Contact POC to coordinate base access.
  
  
  
  

Task 2: Apply primer to scuttle lid and coaming surfaces.

Task 3: Ship manufactured scuttles to the address below NO LATER THAN 15 July 2023. Provide tracking to POC listed above.

• Shipping Address:

USCG SFLC

ATTN: LTJG Liam Middleton

1050 Register St.

North Charleston, SC 29405